Cabling

Network rack installation, from empty frame to labelled rack

Rack and stack is the trade name for building out a network rack. The frame or wall cabinet goes up, the switches, patch panels, firewall and UPS get mounted, and everything is patched so the next person who opens the door can follow it.

5.0 on Google · scoped for your site, in Durham Region and beyond

At a glance

  • Floor racks and wall-mount cabinets
  • Switches, patch panels, firewalls and UPS mounted
  • Patched with leads cut to length
  • Every port labelled, photos at hand-over

What rack and stack covers

Most of the job is deciding where things go. The heaviest gear, usually the UPS, sits low. Patch panels and switches alternate so each patch lead is short. Cable management goes between them, and space is left for the next switch.

Then the equipment goes in on rails or shelves with the right hardware, gets connected, and gets patched with leads cut to length. A rack built this way can be changed later without unplugging the wrong thing.

New equipment, or moving into a bigger rack

Two jobs come up most. A new office or a refit, where the rack is empty and everything arrives in boxes. And an upgrade, where a wall cabinet has run out of room and everything has to move into a bigger rack.

For a move, every live connection is photographed and recorded first, the cutover is scheduled for an evening or weekend, and each port is checked afterwards.

Where we stop

A rack sometimes needs a new dedicated circuit or a receptacle beside it. That is line-voltage electrical work, and a licensed electrician does it. If your room needs one, you hear about it at the survey, so it is booked before install day.

Mounting and patching a switch is one job. Setting up its VLANs and firewall rules is another, quoted separately or left with whoever manages your network.

What you get

Included as standard unless it says otherwise. Add-ons are priced separately and named as such.

  • Rack or cabinet assemblyIncluded: floor racks and wall-mount cabinets, assembled and levelled.
  • Equipment mountingIncluded: switches, patch panels, firewalls, servers and UPS on rails or shelves.
  • Cable managementIncluded: horizontal and vertical management fitted between devices.
  • Patch leads cut to lengthIncluded, so the front of the rack stays readable.
  • LabellingIncluded: every panel port and device labelled.
  • Port list and photosIncluded at hand-over.
  • Workmanship warrantyIncluded: 1 year from install. Anything our installation caused is fixed at no charge. Equipment carries the manufacturer’s warranty.
  • Network configurationAdd-on. Switch and firewall setup, quoted separately.
  • New circuit or receptacleBy a licensed electrician, booked alongside the install.

The process, start to finish

Every job follows the same shape, so you always know where you are in it.

  1. Survey

    We look at the room, the power, the airflow and what is going in the rack.

  2. Layout

    You see where each device goes before anything is ordered.

  3. Build

    Rack assembled, equipment mounted, cable management fitted.

  4. Patch and label

    Leads cut to length, every port labelled.

  5. Hand-over

    Each connection checked, then photos and a port list sent to you.

Want this scoped for your site?

Call, or text a photo of the space. You get a straight answer on what the job involves.

Before you call

Can you work with equipment we already bought?

Yes. Most racks we build hold equipment the client or their IT provider supplied. We check rail fit and depth before the day, because a server deeper than the rack is a common surprise.

Do we need a floor rack or a wall cabinet?

It depends on how much goes in and what you expect to add. One switch, a patch panel and a modem fit a wall cabinet. Anything with a server or a large UPS belongs on the floor.

Will our network go down?

For a new build, no, because nothing is live yet. Moving into a new rack takes a short planned outage, scheduled out of hours.