Business Wi-Fi

Mesh Wi-Fi for buildings where cable cannot reach

Mesh Wi-Fi links access points to each other over the air instead of over cable. That can save days of cabling, but every wireless hop costs some speed. We use it where running cable is not practical, and we will tell you when cable is the better answer.

5.0 on Google · scoped for your site, in Durham Region and beyond

At a glance

  • For places cable cannot practically go
  • Cabled access points wherever a run is possible
  • Business access points, managed from one place
  • Coverage checked after install

When mesh is the right call

Some buildings fight cabling. Plaster and lath walls, heritage interiors you cannot open, a leased unit where the landlord will not approve new runs, or a site that only needs Wi-Fi for a season. A mesh access point only needs power, so it can go where a cabled one cannot.

Mesh also helps at the edges: one wireless hop to cover a back storage room or a detached garage, where a single cable run would cost more than the problem is worth.

Why most access points still get a cable

Every wireless hop spends airtime carrying traffic that a cable would carry for free. One hop is usually fine. Chain two or three, and the far end of the building gets a fraction of the speed of the near end, often when everyone is on a video call.

So the design starts with cable. Where a run is possible, the access point gets one, and mesh fills the gaps. The comparison is laid out in mesh Wi-Fi vs access points.

Why not the kit from the electronics store

Home mesh systems work well in a house. In an office they run short of room for devices, have no central management, and give you no clean way to keep staff, guests and payment terminals apart. We install business access points that can mesh when they need to, managed from one place, with separate networks for staff and guests.

What you get

Included as standard unless it says otherwise. Add-ons are priced separately and named as such.

  • Site walk and coverage planIncluded: where each access point goes and which ones mesh.
  • Business access pointsQuoted per site: centrally managed, meshing where needed.
  • Cabled access points where possibleIncluded in the design, with runs priced on the quote.
  • Staff and guest networksIncluded, kept separate from each other.
  • Coverage checkIncluded: we walk the space after install and confirm signal and speed.
  • Workmanship warrantyIncluded: 1 year from install. Anything our installation caused is fixed at no charge. Equipment carries the manufacturer’s warranty.
  • Ongoing monitoringAdd-on, as part of managed IT.

The process, start to finish

Every job follows the same shape, so you always know where you are in it.

  1. Walk the site

    We look at the walls and ceilings, and where cable can and cannot go.

  2. Design

    Cabled access points first, mesh where the building needs it.

  3. Install

    Access points mounted, configured and named.

  4. Check

    Signal and speed confirmed in the rooms that matter.

  5. Hand-over

    You get admin access and a plan showing where everything is.

Want this scoped for your site?

Call, or text a photo of the space. You get a straight answer on what the job involves.

Before you call

Is mesh Wi-Fi good enough for a business?

For a small office or a building that is hard to cable, yes, with business equipment. For a large space with many users, cabled access points do better, and mesh fills the corners.

Can we use the mesh system we bought for home?

It will run, but it has no proper guest separation or central management, and it struggles once twenty or thirty devices connect.

How many access points do we need?

That depends on the building more than the floor area. The access point estimator gives a starting number.